Products

The ARK-1251 from Advantech is a fanless embedded box PC powered by Intel Core Ultra 5 or Ultra 7 processors with integrated AI capabilities up to 22 TOPS. This compact DIN-rail mountable system features DDR5-5600 memory support up to 96GB, triple Gigabit Ethernet ports, four serial ports, and dual 8K display outputs via HDMI and DisplayPort. Designed for extended temperature operation from -20 to 60°C, it offers wide 12-28V DC input, TPM 2.0 security, and multiple M.2 expansion slots for storage and wireless connectivity. Available from Recab, your Nordic partner for Advantech embedded computing solutions.

The Advantech EPC-S201 is a fanless embedded single board computer featuring the Intel Celeron N3350 Dual Core SoC processor. This slim barebone system supports up to 8GB DDR3L memory and offers versatile connectivity including VGA display output, dual USB 3.0 ports, Gigabit Ethernet, dual RS-232/422/485 COM ports, and 8-bit digital I/O. Designed for semi-industrial applications, it features DIN Rail or wall mount installation options with a compact 139 x 100 x 44 mm form factor. The system operates reliably from 0 to 50°C and integrates WISE-PaaS/DeviceOn support for IoT device management. Available from Recab, your Nordic partner for Advantech embedded computer solutions.

The EPC-R3220 by Advantech is a RISC-based ARM IoT gateway powered by the TI Sitara AM3352 Cortex-A8 800MHz processor, featuring 1GB DDR3 memory and 16GB eMMC NAND Flash storage. This compact box computer offers dual Gigabit Ethernet ports, dual RS-232/485 serial ports with Modbus/OPC-UA protocol support, 6 GPIOs, USB OTG, and optional WiFi/BT/LTE connectivity. Designed for industrial IoT applications requiring multiple connectivity points and low power consumption, it operates across -20 to 70°C temperatures with 12-24V DC power input. The device supports DIN-rail and wall mounting options with hardware watchdog timer protection. Available from Recab, your Nordic partner for Advantech industrial embedded computer solutions.

The Kontron ICP Industrial Cloud/Virtualization Platform is a flexible private-cloud solution built on open technologies including KVM and Ceph, with optional OpenStack control. Designed to eliminate vendor lock-in, ICP enables organizations to maintain full sovereignty over infrastructure and data while supporting evolution from traditional virtualization to Kubernetes-based workloads. The platform offers three deployment models: ICP Virtual Platform for edge environments, ICP Cloud for scalable private clouds up to 100+ nodes, and Kubernetes on ICP for CNF and AI workloads. Day-2 operations including monitoring, logging, backup, and lifecycle support are built-in. Available from Recab, your Nordic partner for Kontron industrial cloud and virtualization solutions.

The Kontron 5G Cloud-Native Mobile Private Network is a 3GPP Release 16 compliant standalone 5G core solution designed for industrial digitalization and enterprise private networking. This fully virtualized, cloud-native architecture supports deployment on any cloud platform including private, public, hybrid, or edge environments. Key features include Service Based Architecture with all essential network functions including AMF, SMF, UDM, UDR, AUSF, NRF, PCF, and UPF. The solution offers FIPS-140-2 compliant security, Kubernetes orchestration, and an intuitive web-based management GUI. Ideal for Fixed Wireless Access, Industrial IoT, railway communications, and public safety applications. Available from Recab, your Nordic partner for Kontron 5G networking solutions.

The Kontron KSwitch R20 is an EN50155 compliant modular Ethernet switch designed for railway applications, featuring up to 28 ports with speeds from 100Mbit/s to 10 Gigabit/s. This fully managed L2/L3 switch supports IEEE1588v2 precision timing, TSN time-sensitive networking, and Power over Ethernet with up to 90W capability. Built with rugged M12-X coded connectors and operating across an extended temperature range of -40 to +70°C, the KSwitch R20 delivers exceptional reliability for demanding transportation environments. The switch offers comprehensive network redundancy protocols, advanced QoS, and flexible management options including web-based interface, CLI, and SNMPv3. Available from Recab, your Nordic partner for Kontron industrial networking solutions.

The NRU-51V+ by Neousys Technology is a rugged NVIDIA Jetson Orin NX and Xavier NX computer designed for GMSL2 automotive camera integration. It delivers up to 100 TOPS AI inference performance with fanless operation from -25°C to 60°C. Supporting four GMSL2 cameras via FAKRA Z connectors, 10GBASE-T Ethernet, isolated CAN 2.0, and M.2 slot for 5G connectivity, this sensor hub excels in ADAS, teleoperation, autonomous mobile robots, and autonomous vehicle applications. GPS PPS synchronization enables microsecond-level camera alignment with LIDAR systems. Available from Recab, your Nordic partner for Neousys Technology edge AI computing solutions.

The Nuvo-9154GC by Neousys Technology is a ruggedized GPU computer designed for autonomous mobile robots in warehousing, logistics, and agriculture. It features Intel 14th/13th/12th Gen Core processors with up to 24 cores, support for NVIDIA RTX series GPUs up to 150W TDP delivering 19.2 TFLOPS, and 4x GMSL2 automotive camera inputs for real-time multi-sensor fusion. The system includes 5x 2.5GbE and 1x GbE with PoE+, 2x CAN 2.0, USB 3.2 Gen2x2 Type-C, and operates from -25°C to 60°C with 8-48V wide-range DC input. MIL-STD-810H certified for shock and vibration resistance. Available from Recab, your Nordic partner for Neousys Technology edge AI computing solutions.

The RGS-9805GC by Neousys Technology is a rugged high-performance computing server powered by AMD EPYC 9005 Turin series processors supporting up to 160 cores and 320 threads, paired with dual NVIDIA RTX PRO 6000 400W GPUs via PCIe Gen5 x16. This MIL-STD-810H compliant server features wide temperature operation from -25°C to 60°C, 9V to 32V DC input with ignition control, dual 10GbE ports with RDMA support, and five additional PCIe Gen5 slots for extensive expansion. Designed for physical AI applications including autonomous vehicles, HD mapping, and robotics, it delivers exceptional GPU computing in harsh environments. Available from Recab, your Nordic partner for Neousys Technology rugged server solutions.

The Hermes II (TR LFx/msd) from Concurrent Technologies is a rugged 3U VPX Plug In Card designed for I/O intensive applications in defense and aerospace environments. Built around the 16-core Intel Core Ultra Series 3 Processor with Intel Iris Xe3 Graphics and NPU for AI inferencing, it delivers exceptional compute performance. Key features include 100GBASE-KR4 Ethernet data plane, secure enclave with security FPGA, 64GB LPDDR5 DRAM, up to 3.84TB NVMe storage with FIPS 140-3 option, and XMC expansion site. The conduction-cooled design operates from -40°C to +85°C and supports SOSA Technical Standard compliance. Available from Recab, your Nordic partner for Concurrent Technologies rugged computing solutions.