The SQF-C8M 930-D by Advantech is an industrial-grade PCIe Gen.4 x4 NVMe M.2 2280 SSD designed for demanding applications requiring high performance and reliability. Featuring 3D TLC flash with capacities from 480GB to 3.8TB, it delivers sequential read/write speeds up to 7,200/6,300 MB/sec. The drive supports AES-256 encryption and TCG-OPAL compliance for robust data security, along with LDPC and RAID ECC for enhanced data integrity. Available in commercial (0 to +70°C) and industrial (-40 to +85°C) temperature grades with heat-spreading thermal solutions. Available from Recab, your Nordic partner for Advantech industrial storage solutions.

The SQF-CU2 ER-1 by Advantech is a high-performance PCIe Gen.4 x4 U.2 2.5-inch industrial SSD designed for demanding enterprise and industrial applications. Featuring NVMe 1.4 compliance, AES-256 encryption with TCG-OPAL support, and advanced LDPC and RAID ECC for data integrity, this SSD delivers sequential read and write speeds up to 7,100 MB/sec and 6,700 MB/sec respectively. Available in capacities from 400GB to 6.4TB with both read-intensive (DWPD 1) and mixed-use (DWPD 3) endurance options. The industrial-grade variant operates from -40 to +85°C, making it ideal for harsh environments. Available from Recab, your Nordic partner for Advantech industrial memory solutions.

The CP-118EL-A from Moxa is a smart 8-port PCI Express serial board designed for POS, ATM, and industrial automation applications. This versatile board supports RS-232, RS-422, and RS-485 serial standards with each port independently configurable. Featuring a 16C550C compatible controller with 128-byte FIFO, it delivers fast data transmission up to 921.6 kbps with hardware and software flow control. The low-profile form factor fits small-sized PCs while the PCI Express x1 classification ensures compatibility with any PCIe slot. Built-in Tx/Rx LEDs enable easy diagnostics, and comprehensive driver support covers Windows, Linux, and UNIX operating systems. Available from Recab, your Nordic partner for Moxa serial communication solutions.

The Lumberg Automation M12 Inner Push Pull portfolio, comprising the RP12M for rail applications and the PP12M for standard industrial use, provides a tool-free fast-locking M12 connection method conforming to IEC 61076-2-010 that prevents accidental disconnects and reduces installation time. Offering X, D, and A codings for data transmission up to 10 Gbit/s, IP65/IP67 protection, and backward compatibility with standard M12 screw locking, it is designed for engineers specifying connectors for railway rolling stock, PROFINET, and industrial Ethernet applications. Available from Recab, your Nordic partner for Lumberg Automation connector solutions.

The Lumberg Automation and Hirschmann Power Connector portfolio from Belden covers seven connector series including M12 Power, CA/CM, 7/8″ and 1″/1-1/8″, MINI Power, M23, ST, and G/GO, offering industrial engineers a comprehensive range of circular and rectangular power connectors rated up to 600 V AC/DC and 42 A for machine building, automation, transportation, and building automation applications. Available in molded cordset, field attachable, and receptacle configurations with IP protection from IP54 to IP68 and operating temperatures from -40 to +125°C, this portfolio addresses virtually every industrial power connectivity requirement. Available from Recab, your Nordic partner for Lumberg Automation industrial connector solutions.

The Lumberg Automation 0985 342 104 is a shielded Fast Ethernet Cat5e double-ended data cordset with a male straight D-coded M12 connector on one end and a male straight RJ45 connector on the other, rated for 100 Mbit/s data transmission at 30 V AC / 42 V DC and 1.5 A. Using a flexible PUR green 4-wire cable available in lengths from 0.3 m to 70 m, it provides IP65/IP67/IP69K protection on the M12 side. Available from Recab, your Nordic partner for Lumberg Automation industrial connectivity solutions.

The Lumberg Automation WRKWT 8-523 is an M12 Food and Beverage wash-down sensor and actuator single-ended cordset featuring an angled female 8-pin A-coded connector with a white PP-GF body, rated at 30 V AC/DC and 2 A. Designed for harsh hygienic environments, it carries IP65, IP67, IP68, and IP69K protection ratings and uses a flame-retardant TPE orange cable with 8 wires at 0.25 mm², operating from -40°C to +105°C. Available in cable lengths from 2 m to 25 m, it is ECOLAB approved and RoHS compliant. Available from Recab, your Nordic partner for Lumberg Automation sensor connectivity solutions.

The Printec-DS DS85S is a highly compact 85-key industrial keyboard built for harsh industrial, military, and maritime environments. Featuring a silicone rubber keypad with metal backplate, carbon contact technology, and IP68 protection class, it is fully certified to IEC 60945 for use in the most demanding conditions. At just 238 x 127 x 16mm, the DS85S packs full keyboard functionality into a minimal footprint and connects via USB. Available from Recab, your Nordic partner for Printec-DS industrial keyboard solutions.

The Printec-DS DS105S TP is a 105-key compact industrial keyboard with integrated touchpad, fully certified to IEC 60945 for harsh industrial, military, and maritime applications. Built on a silicone rubber keypad with metal backplate and carbon contact technology, it achieves IP68 protection and fits a 309 x 127 x 16mm footprint. Laser-etched, UV-coated key symbols ensure lasting legibility, and the unit connects via standard USB. Available from Recab, your Nordic partner for Printec-DS industrial keyboard solutions.

The Hirschmann GDM3106-A0U-10F is a field attachable Form A valve connector from the GDM Standard series, featuring a 90-degree angled body with 3+PE screw-type contacts, rated at 250 V and 16 A with an M16 cable gland accepting cables from 4.5 to 9 mm diameter. Conforming to DIN EN 175301-803-A and ISO 4400, it offers IP65 protection, an operating temperature range from -40 to +125°C, and a black glass-fibre reinforced PA GF housing for reliable use in hydraulic, pneumatic, and industrial machinery valve wiring applications. Available from Recab, your Nordic partner for Hirschmann connector solutions.