Share link

Copy the link below to share the current product.

Please fill out the form for more information

  • This field is for validation purposes and should be left unchanged.
<h4>Meinberg lantime M400<h4>

Contact information

Magnus Unosson

Magnus Unosson

Technical Sales

+46 732-01 03 02

Send Email

Daniel Lundén

Daniel Lundén

Field Application Engineer / Support

+46 730-76 67 22

Send Email

Håkan Gunnarsson

Håkan Gunnarsson

Technical Sales

+46 732-01 03 01

Send Email

Meinberg lantime M400

The LANTIME M400 is available with an integral receiver as well as an IRIG timecode reader and can be customized with a lot of different options to deliver exactly the feature set that is required for a certain application/environment. The ultra compact form factor enables this product to become the ideal time and frequency source in installations where every millimetre counts. With up to 5 network ports, this NTP appliance offers highest port densitiy.

As with most LANTIME M-Series models, a large LC-Display showing the state of the internal GPS receiver and the NTP/PTP subsystem is combined with three bicolor LEDs (green/red) that indicate the status of the three main components: Reference Time (e.g. GPS or GLONASS), Time Synchronization Service (NTP/PTP) and Network (Link status). A fourth red LED is labelled ALARM and can be configured to signal any event that is covered by the notification handling routines. The LANTIME M400 GPS is equipped with a high precision oscillator "TCXO" (look at oscillator options for details).

The oscillator determines the holdover characteristics (e.g. when a reference source signal like GPS is disturbed or jammed). For applications with higher stability/holdover requirements there are several oscillator options available (up to "OCXO HQ").

  • Control elements: Eight push buttons to set up basic network parameters and to change receiver settings
  • Network interface: 1 x 10/100 MBit with RJ45 (up to 4 additional LAN interfaces possible)
  • Power supply: Standard: 100-240 V DC / 100-240 V AC,(50/60 Hz) - Option: 20-60 V DC
  • Operating system of the SBC: Linux with nano kernel (incl. PPSkit) Form factor: Fischer aluminium housing for DIN mounting rail

Product information

Document Description File type Size
Meinberg lantime M400 datasheet Document 45.94 KB Download