The TEWS Technologies TPMC863 is a single-width 32-bit PMC module providing four high-speed synchronous and asynchronous serial communication channels implemented in FPGA logic, supporting EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36, and X.21 physical interfaces with data rates up to 10 Mbit/s synchronous. With 512-longword FIFOs per channel, DMA bus mastering, front panel HD68 I/O, and rear P14 connectivity, it is built for defence, simulation, and industrial embedded systems requiring multi-protocol high-speed serial I/O. Available from Recab, your Nordic partner for TEWS Technologies embedded I/O solutions.

The Kontron XMC403 is a dual 10 Gigabit Ethernet switched mezzanine card designed for high-speed embedded networking applications in defence, aerospace, and industrial computing. Built around the Intel X710-BM2 controller, it delivers two full-duplex 10GbE SFP+ ports over a PCIe Gen 3.0 x8 host interface with hardware-accelerated CPU offload. Supporting both optical fibre and direct-attach copper, the XMC403 complies with VITA 42.0 and IEEE 1386.1 and carries an MTBF of nearly 930,000 hours. Available from Recab, your Nordic partner for Kontron embedded computing solutions.

The VadaTech XMC247 is a single-width XMC mezzanine module delivering quad 10 Gigabit Ethernet connectivity to the host via PCIe x8 Gen3, using the Intel X710-TM4 MAC/PHY. Supporting BASE-T speeds from 100BASE-TX through 10GBASE-T and flexible I/O routing options including front-panel optical, front or rear RJ-45, and 10GBASE-KR via the XMC rear connector, the XMC247 is designed for embedded networking expansion in defence, radar, and communications applications. Air-cooled and conduction-cooled variants are available per ANSI/VITA 47. Available from Recab, your Nordic partner for VadaTech XMC networking solutions.

The Concurrent Technologies XM 620/x01 is an XMC mezzanine adapter designed to carry up to two M.2 PCIe NVMe SSD devices on any host board equipped with an XMC expansion site. Supporting x4 PCIe Gen 1, 2, and 3 per M.2 slot and compliant with ANSI/VITA 42.0, it is available in air-cooled N, E, and K-Series and conduction-cooled RC-Series variants, with extended temperature options down to -40°C and VITA 47 Class CC4 qualification for the rugged conduction-cooled build. Available from Recab, your Nordic partner for Concurrent Technologies embedded storage solutions.

The TEWS Technologies TCP469 is a standard 3U 32-bit CompactPCI module providing eight fully isolated, individually programmable RS232, RS422, and RS485 serial channels based on the Exar XR17D158 octal UART. Each channel is galvanically isolated from the system and from all other channels via digital isolators and an onboard DC/DC converter, with ESD protection up to ±15 kV and baud rates up to 5.5296 Mbps on RS422/RS485. It is designed for defence, industrial automation, telecommunications, and process control applications requiring high-density, multi-protocol serial communication in CompactPCI systems. Available from Recab, your Nordic partner for TEWS Technologies embedded I/O solutions.