Do you want to be part of an ambitious team with a great interest in industrial IT and Cyber Security?
We are looking for an IT-, and network technician where you in your role as an It-, and network technician are responsible for support-, and consultation for our customers, mainly through phone and remote support, but also on site with our customer.
Synective Labs a part of Recab, are now looking for a
FPGA Developer - Do you want to be part of our team?
Download for free: How improved Thermal testing methods have enabled Higher Performance VITA Conduction cooled modules and card-loks.
- Getting more heat out of your board in Rugged Environments
Your workday consists of so-called First Line Support, but also feasibility studies and project management together with our sales team. This will be an important part of your workday to educate our customers and help them excel within industrial data communication.
We expect you to have studied network communication at university or have equivalent education and have gained work experience in the IT-industry where you primarily worked with network solutions and now want to take the step towards greater responsibilities and be a key player in the everyday work.
To succeed in your role, you shall have knowledge within e.g., the following areas:
* Network design and implementation within wired networks
* Switching and routing
* Network protocols such as ex. Ethernet, Profinet, Profibus, Modbus and more
-Two other areas of great importance to us at Recab are Cyber security and Vision solutions.
As our network technician you will be responsible for the investment in Cyber security at Recab. If you have some knowledge within Vision solutions it is a merit, but not a requirement for current employment. You will also have an internal coordination responsibility for Recab’s IT environment.
As a person you are positive and happily take on challenges. As the role consist of project management and customer contact it is of importance that you are well organized, social, and educational and that you have a great customer focus and are driven to help customer and colleagues.
As you will both work from the office and on site with our customer it is required that you have a B- drivers licence. Furthermore, you handle both Swedish and English fluently in both speech and writing as our group language is English and many of our suppliers are international.
Other information
Location: Eskilstuna or Stockholm (Västberga).
Form of employment: Permanent employment
Admission: As soon as possible
Are you interested?
The recruitment process takes place on an ongoing basis and the position may be filled as soon as we find the right person. Send your application or any questions or concerns as soon as possible to HR – Adam Ringh in one of the following ways:
Mail: adam.ringh@recab.com
Phone: +4673 048 71 75
About Recab
At Recab AB we focus on delivering customized IT- solutions within industrial automation, IoT (Internet of Things) and the defense industry. We mainly work within three product areas, industrial networks, sensors & vision as well as embedded computers.
We are about 40 employees, have a turnover of approximately 180 million SEK and have offices in Sweden, Norway, and Denmark. We are owned by our Parent group, Addtech, which is listed on the Stockholm Stock Exchange. More information about Recab and Addtech can be found here:
www.recab.com
www.addtech.se
Swedish version:
IT- och nätverkstekniker sökes till Recab AB!
Vill du bli en del av ett ambitiöst team med stort intresse för industriell IT och Cyber Security?Vi söker nu en IT-, och nätverkstekniker där du i din roll som IT-, och nätverkstekniker ansvarar för support-, och konsultinsatser till våra kunder, både på plats ute hos våra kunder men främst via telefon-, och fjärrsupport.
Din arbetsdag präglas av s.k. First Line Support men även förstudier och projektledning tillsammans med våra säljare, detta blir en viktig del av din arbetsdag för att utveckla våra kunder vidare inom industriell datakommunikation.
Vi utgår ifrån att du studerat nätverkskommunikation på högskola eller motsvarande och har skaffat dig arbetslivserfarenhet från IT-branschen där du företrädesvis arbetat med nätverkslösningar och nu vill ta steget till att ta större eget ansvar och vara en nyckelperson i det dagliga arbetet.
För att lyckas i din roll krävs kunskaper inom bl.a. följande områden
* Nätverksdesign och implementation inom trådade nätverk
* Nätverksdesign och implementation inom trådlösa nätverk
* Switching och routing
* Nätverksprokoll som ex. Ethernet, Profinet, Profibus, Modbus m.fl
– Två andra områden som Recab lägger stor vikt kring är Cyber Security och Visionlösningar.
Som vår nätverkstekniker kommer du ansvara för Recabs satsning inom Cyber Security och har du viss kunskap om Visionlösningar är det meriterande men inget krav för aktuell anställning. Du kommer även få ett internt samordningsansvar för Recabs IT-miljö.
Som person är du glad och positivt inställd och tar gärna för dig och gillar utmaningar. Eftersom rollen innebär projektledning och kundkontakt krävs det att du är strukturerad, social och pedagogisk och du har ett stort kundfokus och drivs av att hjälpa kunder och medarbetare.
Då du både kommer att arbete från kontoret och ute hos våra kunder krävs att du har B-körkort. Vidare hanterar du både svenska och engelska flytande i tal och skrift då vårt koncernspråk är engelska och många av våra leverantörer är internationella.
Övrig information
Placeringsort: Eskilstuna eller Stockholm (Västberga).
Anställningsform: Tillsvidareanställning
Tillträde: Snarast möjligt
Rekryteringsprocessen sker löpande och tjänsten kan komma att tillsättas så snart vi hittat rättat person så ansök gärna redan idag
Är du intresserad?
Skicka din ansökan så snart du kan till Adam Ringh och vid eventuella frågor och funderingar får du gärna kontakta Adam på följande sätt.
Mail: adam.ringh@recab.com
Telefon: 073 048 71 75
Om Recab
På Recab AB fokuserar vi på att leverera anpassa kundanpassade IT-lösningar inom industriell automation, IoT (Internet of Things) och försvarsindustrin. Vi arbetar främst in tre produktområden, industriella nätverk, sensorer och vision samt industridatorer.
Vi är 40-talet anställda, omsätter ca. 180 miljoner kronor och har verksamhet i både Sverige, Danmark och Norge. Vi ägs av vår koncernmoder, Addtech, som är börsnoterat på Stockholmsbörsen. Mer information om Recab och Addtech finner du här.
www.recab.com
www.addtech.se
In Swedish:
Synective Labs växer och söker fler utvecklare till Göteborg, Linköping och Stockholm!
Är du en teknikentusiast som vill bli en del av ett litet specialistföretag där du lär känna alla medarbetare i ett professionellt och engagerat gäng? Läs då vidare och hör av dig till oss!
Utvecklare till Göteborg, Linköping & Stockholm
Som ett av Sveriges vassaste specialistteam inom Embedded- och FPGA-teknik förstärker vi nu kompetensen ytterligare.
Vi befinner oss i en expansiv fas där vår kompetens efterfrågas i många spännande applikationer.
Vi söker dig med ett brinnande intresse för avancerad teknikutveckling och som hunnit skaffa dig relevant erfarenhet.
Hos oss får du jobba med avancerade lösningar i teknikens framkant, i en konsultroll ute hos våra kunder eller i projekt ”in house”. Du blir en del av vårt team där Din kompetens inom våra huvudområden Embedded Systems, Signal/Image Processing, FPGA-Design och Deep Learning blir en väsentlig del av företagets fortsatta utveckling.
Meriterande är erfarenhet av:
Vi söker dig som har en civilingenjörsexamen eller motsvarande. Hos oss och våra kunder arbetar vi oftast i team av varierande storlek, därför värdesätter vi samarbetsförmåga och social kompetens.
Som anställd har du stora möjligheter att utvecklas med oss, kanske framför allt genom intressanta och utmanade projekt!
Vi är ca 25 personer fördelade på våra kontor i Stockholm, Göteborg och Linköping. Vi är ett erfaret team med bra spridning i både kompetens och åldrar. Samarbete och kundnytta står högt på agendan, liksom ett väl fungerande företag med hög trivselfaktor.
Läs mer om vad Gunnar och KG tycker om företaget på career.masterhelp.se/synective-labs
Ansökan – klicka här
Vi svarar gärna på frågor:
Göteborg: Niklas Ljung, +4670-3083623.
Linköping: Magnus Peterson, +4613-4651042
Stockholm: Gunnar Stjernberg, +4670-8688445
Free Webinar: Solving the Thermal Challenges within Embedded systems:
Join Recab’s Gjermund Slettvold and nVent SCHROFF’s Katie Hausman as they take a deep dive into how improved thermal testing methods have enabled higher performance VITA conduction-cooled modules and Card-Loks and ultimately better thermally performing conduction cooled systems. Gjermund and Katie will also discuss market trends and application examples.
Host: Recab’s Gjermund Slettvold and nVent SCHROFF’s Katie Hausman
Duration: 50 minutes
Download: Use form below
Gjermund Slettvold, Recab – Engineering Group Manager. Responsible for system engineering and technology development.
Gjermund Slettvold has extensive experience in systems architecture and design, and holds a Bachelor of Science in Embedded Systems from Buskerud University College in Norway. Prior to Recab, Gjermund spent 10 years with FMC Technologies in various engineering and technical manager roles, with responsibility for design and validation of both subsea and topside systems.
Katie Hausman, nVent SCHROFF – Global Vertical Marketing Manager – Aerospace & Defense
Katie Hausman holds a Bachelor of Science degree in Chemical Engineering from Iowa State University and an MBA from the University of St. Thomas. Prior to nVent, she spent several years with Emerson in various global product management roles. She is currently the Global Product Manager for nVent SCHROFF’s Calmark and Birtcher products.
Do you have any questions about the webinar, please email Gjermund Slettvold.
Welcome to download below!
Synective Labs are specialized in high performance systems, creating optimized hardware and software designs within FPGA and ASIC designs. Synective Labs will be part of the Recab Group as a daughter company.
The embedded industry is rapidly moving towards high performance computing, enabling machine learning and artificial intelligence at the edge. High performance embedded computing, accelerated by GPU, FPGA or ASIC is a key factor in demanding image and signal processing systems. The synergies between Recab and Synective Labs, will reinforce Recab Groups’ ability to deliver turnkey embedded solutions for the future.
Carolin Burlin CEO of Recab says:
– Synective Labs’ extensive competence in FPGA design, algorithms for image and signal processing, machine learning and artificial intelligence, complements Recab’s broad experience within industrial automation, sensor, vision, computer and communication systems for extreme environments and demanding applications.
Niklas Ljung, CEO for Synective Labs says:
– The cooperation with Recab and the Addtech Group provides Synective Labs access to new markets and end customers, but even more exciting the opportunity to work in new teams and additional disciplines with the goal to jointly deliver more complete customer solutions
Synective Labs, being a leading company within FPGA and ASIC design, will continue its successful operation as an independent entity, working with existing customers and partners.
This is Recab:
Recab is a Scandinavian specialist company for demanding applications, owned by technology trading group Addtech AB. Recab delivers innovative solutions within sensors, industrial communications and tail or-made industrial computers for the northern European market. Recab offers overall solutions from edge to cloud with world leading manufacturers within Embedded Computers Systems, Industrial Data Communications and Vision & Sensors. Recab operates in Sweden, Norway, Denmark and the UK.
This is Synective Labs:
Synective Labs is the leading provider of FPGA-related services in the Nordic region. We specialize in signal- and image processing, computational acceleration and embedded system design based primarily on FPGAs but also GPUs and CPUs. We provide solutions and design services to customers within the telecom, med tech, defence and automotive markets from our offices in Stockholm, Gothenburg and Linköping.
Link to Synective Labs: https://synective.se/
Link to info about Recab
Customer support via IIoT – A router made Lämneå Bruk less vulnerable when the Corona pandemic started
A router, that the machine manufacturer Lämneå Bruk uses and mounts in the control cabinet of their machines for the last ten years made Lämneå Bruk less vulnerable when the Corona pandemic struck in the beginning of 2020. The router makes it possible for them to connect to the customers machine remotely and proceed the support and service that the customer has bought.
Lämneå Bruk in Ljusfallshammar, located outside of Finspång – Sweden, about three miles from Norrköping is a modern family business focused on manufacturing of highly automated machines, manufacturing lines and facilities for the wire drawing industry with the whole world as their market field. The company had annual sales of about 160 SEK in the financial year 2019/2020. As much as 95 percent of the manufacturing are exported to 98 countries. In total, there are up to 123 different types of machines sold in Germany, USA, Canada, China, South Korea, Japan and India amongst others. Other countries in Europe also belong to the company’s important export markets. The products manufactured using the machines produced by Lämneå Bruk include welding wire, welding electrodes, springs, tubular wire, nails and screws.
One of the most common and typical products among the wire drawing machines is the drawing machine, which has the task of reducing steel wire from coarse to thin by pulling it, for example from 8 to 3mm. Raw materials are wire rod from suppliers all over the world. Another type of machine is so-called rewind lines. In these, the thread is repackaged to the end customer’s packaging. Even though 60 percent of all machines from Lämneå Bruk are machines for the welding wire industry, machines are also built for, for example, spring wire, reinforcement an staple products.
Lämneå Bruk dates back to the early 18th century when the facory was a foundry. The journey in the wire industry started as early as 1823. Today, the company is owned by the CEO Jonas Hagstedt, whose father bought the company in the late 1950s. About 50 employees include designers, automation technicians, programmers, machine fitters in electricity and mechanics, cnc operators, welders, painters, support staff and administrators in logistics among other things. You basically have all the professions that enable Lämneå Bruk to produce everything from home.
We have control over the entire production chain
-We are able to manufacture a wide range of technically advanced machines for different types of wire, from small single machines to complete lines. Each machine is unique and each customer has special requirements for their facility. We build what the customer request and transform ideas into entire machine system solutions that are both user- and maintenance-friendly, says Jonas Hagstedt, CEO and owner when he comes in and visit the magazine Automation, which visited the factory in September 2020.
-We are actually quite alone on the market here in Europe, with just a few competitors. We have control over the entire production chain, and we take responsibility for all parts of the machine. Electrical design, programming, manufacturing of the machine and control cabinets. Everything is assembled on site here in Sweden. We live up to our slogan: “A passion for service”. We are proud to be able to offer excellent customer service before, during and after sales, Jonas Hagstedt emphasizes.
The company is well advanced in the technology. From order to finished machine, it takes between two and six months before the machine can be shipped to the customer. Often together with staff to ensure that the installation goes well and that the staff at the customer company receive good training and support right from the start.
-The customer can decide a lot about what his machine will look like, says Peder Helgesson, automation manager at Lämneå Bruk, who guides the magazine Automation through the facility.
-The customer can make different choices regarding components, mechanical and electrical design and the color of the machine. But we try to standardize as much as possible and therefore the machines are modular as far as possible. We use ready-made well-integrated complete solutions from our subcontractors with control and drive technology that also have integrated safety and energy regeneration.
Technics are today used in over 450 machines across the globe
Lämneå Bruk uses different control systems for their machines depending on the wishes of the customer in accordance with the technology they themselves use in their factory. Generally Siemens controls the machines that are exported to European countries and accounts for most of the solutions (ca. 60-70 percent). Allen-Bradley is used in what is sent to the US (30 percent) and Mitsubishi is mostly used on the East Asian markets including China and Japan. A router is mounted in the control cabinet in the machine or machine line to ensure that the suppliers have access to support and service remotely.
This is where Lämneå Bruk cooperate with Recab, a Scandinavian company specialized in custom solutions within what they call “from edge to cloud”, as well as embedded computer systems, industrial data communication, sensors, and vision. The cooperation began in 2010 and the technics are today used in over 450 machines across the globe. Before that Lämneå Bruk used another, less practical, solution, a regular modem that you connected to through a phone call.
-When we started up our online support in 1994 most people didn’t have broadband connection, so it was probably the only usable solution, says. Peder Helgesson. He works as an automation manager at Lämneå Bruk but also belongs to the team of eight people (automation technicians) who go out and help the customers with installation and training.
The machine is constantly prepared for connection.
The product consists of a router attached in the control panel of the machine and its task is to mediate the connection between the operator panel that is attached to the machine and make it and the entire network on the machine available to the service technician at Lämneå Bruk. This way, the service technician can troubleshoot the machine as if they were sitting on site in the customer’s facility. There are hundreds of sensors in each machine and a lot can happen during the operation of the machine. Everything from a sensor breaking, that the pneumatics not working because a valve may have broken, a pulse sensor to an engine has stopped working to a mechanical fault that has occurred because the wire fell off and accidently hit some part of the equipment. HMIs are also sensitive things with their touch screens that can break because you may press too hard and too much on the screens while wearing rough work gloves.
– The router connects to the network and further to the central server, which in this case is located in France, says Magnus Unosson, customer responsible at Recab
– The advantage is that it is a secure connection that does not disturb the company’s firewalls since it connects from the inside and out. Software that belongs to the router also handles IP addresses that are there in the background. The customer easily connects to the router with the help of a unique product code key. The solution uses the company’s existing connection to the network. A fixed connection also means that you avoid problems with SIM cards and such. The machine is constantly prepared for connection. When the service is to be done, the customer wants access to new functions on the machine or when various additional programming in the plc is to be done, you connect to the server.
Solution
The solution that Recab offers consists of both the hardware, a router from Etic Telecom, as well as the software called m2me. The m2me-solution by Etic is intended for remote maintenance and control of all types of industrial units (plc, hmi, Drive, etc.).
– In these times, during the Corona Crisis, when it has not been possible to travel freely across the world during long periods of times it has been a huge advantage to be able to connect to the customer remotely from home, states Peder Helgesson. Occasionally the customers need extra plc programming and naturally it becomes cheaper when we can do it from here, since it saves us long expensive trips and lots of time. There can be about 50 pages in the operator interface with images and everything. Our machines use different standard modules, but it is common for the customer to want their own adaptions and additions.
This might be Lämneå Bruks largest competitive advantage on the market. That they can deliver machines that are based on standard design but offering a lot of customizations. They also build and develop new machines or functions in direct cooperation with their customers. These machines are completely customized without a standard basic to begin with.
Text and photo by DAGMAR ZITKOVA – Magazine Automation
Link to Lämneå Bruk
See a selection of Recab´s products within IIoT
For more information and contact with Recab, please fill in the form
We look forward to 2021 and all the opportunities we have and can create TOGETHER.
If you want to get in touch with us during Christmas and New Year, – you can reach us at
sales@recab.com or by phone:
Sweden
+ 46 8 683 03 00
Norway
+ 47 62 54 02 91
+ 47 96 90 22 11
Denmark
+ 45 70 300 310
MERRY CHRISTMAS & HAPPY NEW YEAR!
www.metric.dk som du kender den, er stoppet.
Men vi har stadig de kendte produkter du kender fra tidligere.
Sidste år blev det meste af Metric Industrial A/S lagt ind under Recab, som vi har arbejdet tæt sammen med.
Recab er et stort automationshus, som har en meget bredere produkt portefølge, samt mulighed for
custom design også. Nedenunder kan du vælge hvilken produktgruppe, du er interesseret i, så videresender vi dig
til det mest relevante område på Recab.com. Bagefter kan du jo altid udforske hvad vi ellers kan tilbyde
Recab will develop and deliver a flexible sensor-platform, and OT* infrastructure to Smart Winter Roads project: Recab are going to develop the hardware, that will consist of a rugged Smart City sensor platform that can accommodate a variety of sensors and/or cameras for acquisition of environmental data like precipitation, temperature, humidity, wind force, etc. The project will also develop solutions for the public, to provide real-time local weather information and driving conditions.
A vehicle mounted sensor platform will also be developed for integration into the equipment carriers. This unit will gather relevant data from the vehicles themselves and the mounted equipment. Analysis of this data will provide the operators with information on the condition of the equipment in addition to documentation on the quality of the service.
Read more about the Smart Winter Roads project: www.smartemjøsbyer.no
Read more about the Recab Engineering Team: www.recab.com/engineering
Contact Recab:
Trond Halden – Project Manager / FAE, Recab Norway / +47 48145924 / trond.halden@recab.com
Contact: Smart vinterveg
Pål Godard – Assistant Project Manager / + 94 81 90 17 / pal.godard@gjovik.kommune.no
Contact: Betelo AS
Jostein Bjørkøy – General manager / + 92 20 52 81 / jostein@betelo.no
Hjemmeside: www.betelo.no
*“Operational Technology, or OT, is a critical network segment used by businesses that produce goods or deal in physical processes. Industries like manufacturing, chemicals, oil and gas, mining, transportation, and logistics all use specialized technologies to run things like assembly floors, production yards, and energy grids. The control, monitoring, and management of these systems have been progressively automated over the last few decades, and the specialized systems that perform these tasks are variously called Industrial Control Systems (ICS), Supervisory Control And Data Acquisition (SCADA), or simply OT.”
Recab free webinar – Vision systems and sensors :
Klas Bengtsson, Technical sales, Vision and ID at Recab describes the market for vision systems and sensors. Which techniques are most used today, which are in progress and which are expected to disappear?
Jonas Lindgårde, Vision & Support manager, and Hans Eliasson, CEO of IFM Electronic, show how sensors and sensors can create value when the industry is digitized. They provide examples of areas of use and highlight opportunities with new technology such as 3D cameras.
Practical information
Date: Tuesday, November 24, 2020
Time: 09:00 to 10:00
Click here for registation
The webinar the webinar is held in Swedish, for an English version or other questions, please contact Klas Bengtsson
Link to the association Automation Region
Link to IFM Electronic
So what functions can you perform with icom Data Suite?
– Convert freely between different protocols, for example Modbus RTU/TCP, OPC UA, Siemens S7 and 60870-5-101/104.
– Gather data from control systems, sensors, digital/analog inputs etc.
– Process and perform calculations using gathered data.
– Transmit data using for example MQTT, FTP or e-mail.
– Save data in a local database, and export this as a CSV file for further analysis.
– Monitor systems and raise alarms when errors occur or if values pass certain thresholds.
– Remotely connect and control systems, switching of digital/analog outputs etc.
NOTE, in the webinar the function Data Logger is mentioned under Package 1. This function now belongs to Package 2.
In this webinar we will present the different building blocks that are included, and give a demonstration of installation and basic configuration.
Facts for free Webinar: icom Data Suite
– Host for the webinar: Daniel Lundén FAE / Support – Industrial Data Communication
– Webinar time: 45 min
– For registration: Fill in the form below, in a few minuts you have an email from us with the link to the free webinar
Swedish version/Svensk version:
Välkommen till gratis webinar – icom Data Suite
Få ut mer av din Insys-router:
Med icom Data Suite installerad får du tillgång till en protokollkonverterare, data logger och IoT Gateway i en enhet. Allt konfigureras enkelt via ett webbgränssnitt och kräver inga programmeringskunskaper. Insys erbjuder även ett gratis test med samtliga funktioner under 45 dagar.
Så vilka uppgifter kan du utföra med icom Data Suite?
– Konvertera fritt mellan olika protokoll, bland annat Modbus RTU/TCP, OPC UA, Siemens S7 och IEC 60870-5-101/104.
– Samla in data från kontrollsystem, sensorer, digitala/analoga ingångar etc.
– Bearbeta och utföra beräkningar på insamlad data.
– Vidarebefordra data via bland annat MQTT, FTP eller e-mail.
– Lagra data i lokal databas, samt exportera denna som CSV-fil för vidare analys.
– Övervaka system och larma vid fel eller om uppsatta gränsvärden överskrids.
– Fjärrkommunicera med kontrollsystem, ändra värden på digitala/analoga utgångar etc.
I detta webinar kommer vi presentera de olika byggstenarna som ingår, samt en demonstration över installation och exempel på konfiguration.
OBS, i webinaret nämns funktionen Data Logger under Package 1. Denna funktion tillhör numer Package 2.
Fakta för webinar “Få ut mer av din Insys-router”:
– Värd för webinar: Daniel Lundén FAE / Support – Industrial Data Communication
– Webinar tid: 45 min
– Registering: Fyll i formuläret nedan, inom ett par minuter får du ett mail från oss med länk till det fria webinariet.
Recab + nVent SCHROFF offers the most innovative designs in mission critical equipment
On top of those challenges, the customers are expected to meet mechanical and thermal requirements with products that are backed by SWaP design expertise. Not to mention a need for simplified supply chains and manufacturers that have a broad COTS offering and services under one roof to meet any application demand.
After seeing and hearing the challenges faced by both manufacturers’ customers, Recab and nVent SCHROFF have teamed up to offer the best of both their worlds in a single package. Recab + nVent SCHROFF offers the most innovative designs in mission critical equipment – backed by industry-leading technology that has been developed by two world-class organizations. Together, we form an unmatched group of rugged defense computing experts with a wide range of COTS products enabling SWaP optimized solutions. Two such application examples are below:
Application: Recab Robust recorder
This application began as a regular 3U CompactPCI project. Once in place, the customer wanted MIL contacts on the front and a more durable chassis. Recab together with nVent SCHROFF then developed a solution with standard cPCI content in a durable box with Mil 38999 connectors. With removable SSDs and a few extra slots, this became a solution that can be equipped for different projects. Contact us for more info about the Recab Robust recorder Innovative designs in misson critical equipment
Application: Customized Hyperconverged Infrastructure (HCI)solutions
Recab together with nVent SCHROFF provides bespoke HCI solutions for customers looking to drive IT efficiencies throughout their business.
One of our areas of specialty is in delivering support for customers operating in environments requiring rugged hardware, such as the defense and aerospace industries. These are areas where computing technology not only has to be hyper-connected but meet tough certification standards and be resistant to among other extreme shock, vibration and wide temperature ranges.
Recab & nVent-Schroff latest innovation – Advanced Modular Computers product family;
This kind of application has a high level of complexity and, in the past, would have necessitated many different functions, each requiring an individual hardware unit. But IT infrastructure in these industries has come a long way. Now, Recab can provide customers with rugged and resistant hardware from the best suppliers around the world, like nVent SCHROFF with the simplicity and scalability of best-in-class HCI technology. Contact us for more info about the Customized Hyperconverged Infrastructure – Innovative designs in misson critical equipment
Extra info from us – Read about our mSys-3500
A turnkey scalable CPU+FPGA hardware/software solution, for high speed, synchronized analog/digital data acquisition, typically used within “Big Science” physics community for high energy science projects as we also create together.
About Recab:
Since 1996, Recab has come to be known to provide products and services for Sensor, ID & Vision, Industrial Data Communication, and Embedded Computer Systems for demanding applications. Excelling in the defense and avionics industry, their design excellence within the backplane, PCB design, and overall system design has come to be an industry standard. Recab’s long history and deep knowledge of military and aerospace industry combined with their robust testing and certifications along with their reputation as embedded computing platform specialists have set them up for a great, new partnership with nVent SCHROFF.
About nVent Schroff:
A relatively new company in name – nVent split off from Pentair two years ago – but not experience, nVent SCHROFF has been considered industry experts in electronics protection and mechanics for over 50 years. nVent Schroff prides themselves for their innovative designs to better meet size, weight, and power (SWaP) requirements. Whether their clients are in need of rugged, shock and vibration protection or help with increasing demands in thermal dissipation Schroff’s products supply superior thermal performance backed by thermal analysis expertise and design support.
Link to nVent Schroff
Link to more info about the HCI
Link to Recab´s offer in Defense and Avionic
For more information how we can tailor for you, please fill in the form
Main task is being responsible for pre- and post-sales activities. You will have to understand our product features, and or supporting design offerings, all leading to the supply of custom specific embedded computer solutions, to a great variety of customer. Your task is to remove commercial barriers to a sale and perform sales closing of the given business case. We expect you to be self-driven and to have a passion for sales and quality in your profession. Strong and self-driven sales motivation skills is mandatory.
Specific duties:
Background, Education and skills:
What’s in it for you:
As Key Account Manager / Sales Engineer you will work focused on business development (our external customers), together with internal stakeholders (engineering support) / external partners, on leading edge technology products and solutions. You will face small and large, demanding and exciting projects and customers. We have a large international partner network; We work with the engineers of our partners in Taiwan, Europe and the United States.
In a small company, you will be responsible for initialisation of projects from A to Z and will develop in several disciplines and establish relationships with HW / SW developers and product managers around the world. You become part of an offensive Recab Team in a sales-oriented organization with a flat structure and open sharing culture. You will have an independent position, with a high degree of influence over own workday.
About Recab:
Recab is a Nordic IT company with headquarter in Stockholm. We are part of the Addtech Group,
a listed technology group with over 2900 employees in 130 companies and with more than 10 billion DKK in turnover. Recab develops innovative embedded computer systems, industrial communication, machine vision & sensors for demanding applications.
Our main markets are defence & avionics, maritime/offshore, energy, transportation, communications, industrial automation, and science. We support world leading customers, and cooperate with world leading partners & suppliers, and world class quality is mandatory for what we provide. We are ISO9001:2015 and ISO14001:2015 certified, and we continuously seek innovation, and systematic quality improvements.
Our vision is ‘Enabling World Class Applications’!
Recab Denmark is located in modern office facilities in Smørum, close to Copenhagen. We offer a good work environment, and the Recab Denmark facilities are included as a part of the Danish Addtech headquarter. We offer a good infrastructure and access to many good local Addtech colleagues.
CV, documents and / or questions related to the position can be answered by Managing Director, Brian Ulskov Sørensen, bus@recab.com Mob.: + 45 20 20 85 85
You will be working closely with our Nordic and UK Engineering teams in benchmarking / debugging, test, setup and support of IPC- and embedded solutions, as well as being responsible for pre- and post-sales support activities. You will have to understand at depth our development and product features, tools and design flows and facilitate adoption of these solutions with a variety of customer systems.
Your task is to conduct Embedded System Design, HW Design, remove technical barriers to a sale and help close business. We expect you to be self-driven and to have a passion for embedded solutions, and quality in your profession. Strong analytical and problem-solving skills is mandatory.
Specifics Duites:
Our Tools – Experience & knowledge preferred:
Background, education and skills:
BSc or MSc graduatefrom streams of Engineering such as Electronics and Communication (ECE), Electrical and Electronics (EEE), Computer Science / Informatics, Embedded Systems or Cybernetics.
What’s in it for you:
As Project Engineer / Field Application Engineer you will work with both internal stakeholders and external partners/customers on leading edge technology. You will face small and large, demanding and exciting projects and customers. We have a large international partner network; We work with the engineers of our partners in Taiwan, Europe and the United States.
In a small company, you will be involved in projects from A to Z and will develop in several disciplines and establish relationships with HW / SW developers and product managers around the world. You become part of an offensive Recab Team in a sales-oriented organization with a flat structure and open sharing culture. You will have an independent position, with a high degree of influence over own workday.
About Recab:
Recab is a Nordic IT company with headquarter in Stockholm. We are part of the Addtech Group,
a listed technology group with over 2900 employees in 130 companies and with more than 10 billion DKK in turnover. Recab develops innovative embedded computer systems, industrial communication, machine vision & sensors for demanding applications.
Our main markets are defence & avionics, maritime/offshore, energy, transportation, communications, industrial automation, and science. We support world leading customers, and cooperate with world leading partners & suppliers, and world class quality is mandatory for what we provide. We are ISO9001:2015 and ISO14001:2015 certified, and we continuously seek innovation, and systematic quality improvements.
Our vision is ‘Enabling World Class Applications’!
Recab Denmark is located in modern office facilities in Smørum, close to Copenhagen. We offer a good work environment, and the Recab Denmark facilities are included as a part of the Danish Addtech headquarter. We offer a good infrastructure and access to many good local Addtech colleagues.
CV, documents and / or questions related to the position can be answered by Managing Director, Brian Ulskov Sørensen, bus@recab.com Mob.: + 45 20 20 85 85
Welcome to our supplier Moxa’s TechTalk:
5 Critical Success Factors for the Industrial Internet of Things
Friday, Sep 25, 2020 11:00 AM – 11:30 AM CEST
In this webinar we will look at the “TechTalk: 5 Critical Success Factors for the Industrial Internet of Things”. Our co-host will be Bosch Connected Devices and Solutions GmbH, and together we will demonstrate how you can add tangible value to your production process and lay a foundation for expandable and reliable IIoT/Industry 4.0 platforms with scalability and adaptability.
Our 30-minute TechTalk will focus on the fundamentals of automation technology and initial approaches to changing your business model. To make the most of this session for you, we will illustrate this by referencing real-life success stories of IIoT implementations in a dialogue in front of the camera.
Furthermore we will show hands-on how you can retrofit plants and machines with invasive as well as non-invasive ways, connect them to the cloud and create new business applications in the end.
Meet your presenter:
– Philipp Jauch (Moxa)
– Hermann Berg (Moxa)
– Benjamin Reder (Bosch Connected Devices and Solutions)
– Tuncay Gülfirat (Bosch Connected Devices and Solutions)
As a follow-up offer, these presenters will be your contact window for any questions through direct communication channels.
Agenda for TechTalk: 5 Critical Success Factors for the Industrial Internet of Things:
– Dialogue
– 5 Critical Success Factors forthe Industrial Internet of Things
– Hands-On Demo “OEE Connectivity in Production”
– Q&A
. 
Link for registration: Fri, Sep 25, 2020 11:00 AM – 11:30 AM CEST
Link to our selections of Moxa
Do you want more information about Moxa or our other projects or products:
Magnus Unosson / 073-201 03 02 / magnus.unosson@recab.com
Håkan Gunnarsson / 073-201 03 01 / hakan.gunnarsson@recab.com
Bjørn Espen Aase, Managing Director, Recab Norway: As part of TDG, Recab will contribute with innovative technology in digitalization of military vehicles. This is an important contribution in strengthening the Norwegian industry in supporting the Armed Forces with relevant and modern equipment in order to contribute to a higher operational strength.
Total Defence Group’s Chairman – Rune C Vamråk is very pleased with the newest partner, Recab have already contributed in the revived DIGITAL DIVISION in TDG. There will be many defence projects in the coming years which will need specialized competences, digital solutions and Recab’s track record is very important for broadening the group’s capacity.”
– Recab will definitely strengthen the digital competences in the group and add very useful experiences into our TEAMS fighting for defence contracts.
Link to Total Defence Group
Link to Recab Defence & Avionics
For more information please contact:
Bjørn Espen Aase – Managing Director, Recab Norway
+47 95 05 95 15
bjorn.espen.aase@recab.com
Free webinar VPN Solutions:
The most common way to solve this is by using some kind of VPN solution. This does however require a certain level of knowledge to implement and maintain, and can also be very time consuming as the number of connected sites increase.
This is something we at Recab can help you with.
In this free webinar VPN Solutions we will look at some different types of VPN, and also present a VPN solution from Insys that doesn’t require and knowledge to use, maintains a high security with certificates that are updated automatically, and that doesn’t require any expensive special mobile subscriptions.
Host for the webinar: Daniel Lundén FAE / Support – Industrial Data Communication
Webinar time: 45 min
For registration fill in the form in below, and we send you a email in a few minutes with a link so you can start your webinar whenever you want
Swedish Version:
Webinar – VPN Lösningar
I takt med den ökade digitaliseringen kommer också kraven på att allt mer arbete ska ske på distans. Oavsett om det gäller underhållsarbete eller datainsamling ställer den omställningen höga krav på säkerheten för att undvika dataintrång och attacker som Denial of Service som kan orsaka stora och kostsamma skador.
Det vanligaste sättet att lösa detta är någon form av VPN-lösning. Detta kräver dock en viss kunskap att sätta upp och underhålla, och kan även bli väldigt tidskrävande i takt med att antalet uppkopplingar ökar.
Detta är något som vi på Recab kan hjälpa till med.
I detta webinar kommer vi titta på lite olika VPN-tekniker, och kommer även presentera en VPN-lösning från Insys som inte kräver någon kunskap att använda, håller hög säkerhet med certifikat som uppdateras automatiskt och inte kräver dyra telematik-abonnemang.
Värd för webinariet: Daniel Lundén FAE / Support – Industrial Data Communication
Webinar tid: 45 min
För registering, fyll i formuläret nedan så skickar vi en länk inom ett par minuter så kan du starta webinariet när du själv önskar
We invite you to Insys free webinar:
Wed, Jun 3, 2020 4:00 PM – 4:45 PM CEST or Thu, Jun 4, 2020 10:00 AM – 10:45 AM CEST
The analysis of these signals brings real data insights to the surface, offering enormous potential for process optimisation, proactive operations, digital support for decision-making and automated workflows. However:
Register here:
Wed, Jun 3, 2020 4:00 PM – 4:45 PM CEST
Thu, Jun 4, 2020 10:00 AM – 10:45 AM CEST
The speakers: Remote Maintenance 4.0 – Location independent access and up to 60% cost savings:
If you do not have time, you can still benefit:
Register and we will provide you with the recorded webinar.
Do you want more information about Insys or Recab´s other products / projects:
Magnus Unosson / 073-201 03 02 / magnus.unosson@recab.com
Håkan Gunnarsson / 073-201 03 01 / hakan.gunnarsson@recab.com
Your main responsibility and focus will be on the development of innovative embedded Computer systems in a collaborative cross functional team. You will be working closely with our Nordic and UK Engineering teams in benchmarking / debugging, test, setup and support of IPC- and embedded solutions, as well as being responsible for pre- and post-sales support activities. You will have to understand at depth our developments and product features, tools and design flows and facilitate adoption of these solutions with a variety of customer systems. Your task is to remove technical barriers to a sale and help close business. We expect you to be self-driven and to have a passion for quality in your profession. Strong analytical and problem-solving skills is mandatory.
Specific duties:
Background, educations and skills:
What´s in it for you:
As Project Engineer / Field Application Engineer you will work with both internal stakeholders and external partners/customers on leading edge technology. You will face small and large, demanding and exciting projects and customers. We have a large international partner network; We work with the engineers of our partners in Taiwan, Europe and the United States. In a small company, you will be involved in projects from A to Z and will develop in several disciplines and establish relationships with HW / SW developers and product managers around the world. You become part of an offensive Recab team in a sales-oriented organization with a flat structure and open sharing culture. You will have an independent position, with a high degree of influence over own workday.
About Recab:
Recab is a Nordic IT company with headquarters in Stockholm. We are part of the Addtech Group, a listed technology group with over 2900 employees in 130 companies and with more than NOK 10 billion in turnover. Recab develops innovative embedded computer systems, industrial communication, machine vision & sensors for demanding applications. Our main markets are defense & avionics, maritime/offshore, energy, transportation, communications, industrial automation, and science. We have world leading customers, and world class quality is mandatory for what we do. We are ISO9001:2015 and ISO14001:2015 certified, and we seek innovation, and systematic quality improvements.
Our vision is ‘Enabling World Class Applications’!
Recab Norway is located at Hamar, the inland capital, which has all the social functions, a wide range of education for children and youth and a rich cultural and outdoor life. Mjøsa – Norway’s largest lake – is literally just outside the door, and the neighbouring municipality Stange is ‘The Tuscany of the North’ with a beautiful cultural landscape and rural cosiness. The winter’s adventure for cross country skiing in Vangsåsen/Hedmarksvidda is one of the best in Norway.
Hamar has low house prices, no car queues and is perfect for families with small children. A well-developed ‘partner network’ can help your partner find a job, if needed.
Period of application: 07.06.2020
Application form: Permanent
City: Midtstranda 51, 2321 Hamar, Norway
In this recruitment we cooperate Impact AS:
Contact and applications: Stig Solberg +46 916 35 552
Carolin Burlin CEO Recab:
-It is a great achievement made possible by the amazing Recab Team Players. The team has shown remarkable creativeness and innovation in challenging times. The fighting spirit and true will to find solutions is characteristic for a Recab Team Player, and for our mission to enable world class applications.
-Our wonderful customers and partners have shown great understanding through these times and for that I am truly grateful.
-We are entering the new financial year with new solutions and a wide product portfolio, stretching from edge to cloud, applicable for most markets.
This is Recab
Recab is a Scandinavian specialist company for demanding applications, owned by technology trading group Addtech AB. Recab delivers innovative solutions within sensors, industrial communications and Tail or-made industrial computers for the northern European market. Recab offers overall solutions from edge to cloud with world leading manufacturers within Embedded Computers Systems, Industrial Data Communications and Vision & Sensors. Recab operates in Sweden, Norway, Denmark and the UK.
Link to more about Recab
Link to Recab´s business divisions
Link to Addtech
For more information please contact:
Annelie Ivansson
Marketing Manager
Annelie.ivansson@recab.com
Pontus has nearly ten years of experience in sales. He has earlier worked within the component- and telecom market among others, and was most recently employed at the company Arrow Electronics.
Lars Virdeby, Sales Manager for ECS Sweden states:
Pontus is well experienced with solutions similar to what we work with at Recab, and with his experience about the market he will be a valuable addition to our Sales team within the ECS market.
This is Recab
Recab is a Scandinavian specialist company for demanding applications, owned by technology trading
group Addtech AB. Recab delivers innovative solutions within sensors, industrial communications and
tailor-made industrial computers for the northern European market. Recab offers overall solutions from edge to cloud with world leading manufacturers within Embedded Computers Systems, Industrial DataCommunications and Vision & Sensors. Recab operates in Sweden, Norway, Denmark and the UK.
Do you want to get in contact with Pontus or our Embedded Computer System team:
Pontus Eriksson / +46 73 073 79 55 / pontus.eriksson@recab.com
Lars Virdeby / +46 8 683 03 46 / lars.virdeby@recab.com
Nils Olav Gjørvad / +47 969 022 11 / nils.gjorvad@recab.com
– We welcome DPIE to Recab and look forward to evolving together as companies through exchange of competence and the possibilities of new businesses, says Carolin Burlin, CEO of Recab. Martin Frederiksen, CEO of DPIE, will continue to operate the business in the UK as part of the Recab Group.
In 2018, Recab merged with Metric Industrial and acknowledged the long-term opportunities to expand further through additional acquirements and therethrough strengthen the offer available for customers. The current customer stock includes companies such as Flir, DeLaval, Mycronic and Scania.
This is Recab
Recab is a Scandinavian specialist company for demanding applications, owned by technology trading group Addtech AB. Recab delivers innovative solutions within sensors, industrial communications and tailor-made industrial computers for the northern European market. Recab offers overall solutions from edge to cloud with world leading manufacturers within Embedded Computers Systems, Industrial Data Communications and Vision & Sensors. Recab operates in Sweden, Norway, Denmark and the UK.
For more information please contact:
Carolin Burlin, CEO
Carolin.burlin@recab.com
Nevertheless, the number of Coronavirus infections continue to fall in China, and factories are making progress in ramping up production. The majority of the production staff have resumed their work.
But because of the new restrictions being implemented by authorities around the world and the current rate of the spread of the virus, disruptions in the supply chain are expected, as well as bottlenecks and delays. Our Operations department monitors our inventories and orders on a daily basis and take measures to alleviate any potential bottlenecks.
In order to easily plan our deliveries, we encourage you to place orders as soon as possible so we know the real demand and plan accordingly.
Our top priority is to maintain the general ability to deliver to our customers, so we are continuously evaluating any impact this may have on our deliveries and will promptly update you as soon as new information is available.
We are closely monitoring the situation and fully support the measures and actions issued or taken by the authorities.
Naturally, your usual sales representative is at your disposal to answer any additional questions that you may have.
Yours Sincerely,
Carolin Burlin, CEO Recab AB